SLIVERSTAR1200W Industrial Ironing Machine with Hanging Bottle Steam Iron for Clothing Factory Curtains

ES-94A Base size: 209 x 120 mm.

1. Installation method:① Hang the hanging bottle filled with water 2 meters above the workbench.② Connect both ends of the water pipe to the hanging bottle water valve and solenoid valve joint.③ Connect the power cord and water pipe with the S connector before use④ Firstly, confirm whether the voltage used meets the requirements, then connect the power supply and turn on the junction box switch⑤ Set the thermostat to level 4 and heat for 10 minutes⑥ Open the water valve and press the steam button to start ironing when the steam emitted by the iron is normal⑦ When stopping ironing, place the iron on the cushion plate⑧ When stopping the use of the iron or leaving the workbench, the iron power must be cut off. After cutting off the power, the iron should be placed on the pad for more than 1 hour to cool down2. Instructions for using the iron:① Pressing the steam button 2-3 times with your thumb will release steam within a few seconds② To achieve the best ironing effect, the steam button should not be pressed for a long time③ Adjustment of thermostat gear1/ 2 → preheating3 →Silk and synthetic fabrics low temperature4 → Cotton and wool products medium temperature5 →Nylon, linen and thick fabrics high temperature④ Recommend using Teflon iron shoes to prevent fabric from producing bright spots. Products can be purchased from agents⑤ Due to the high temperature of the iron’s bottom plate, it must be placed on a silicone pad to prevent accidents. When stopping ironing, the power must be cut off⑥ Do not place flammable materials on the workbench during ironing⑦ Except for the operator, no one is allowed to use the iron indiscriminately